Electric Handle for rim type panic bars

Electrically operated handle for all types of rim exit devices

TO COMBINE THE ELECTRIC HANDLE AND A RIM TYPE PANIC BAR, A SPECIFIC FIXING PLATE MUST BE USED WITH - SEE CHART TO IDENTIFY THE FIXING PLATE

Brushed metal body and handle - other colours available on demand
Case-hardened steel internal mechanisms
Dimensions: mm 232 x 48 x 38, handle height mm 84
Handle panel can be rotated 45° or 60° depending on the type of panic bar used
Mechanical enabling through Euro-profile cylinder

Power supply 12/24 Vac/dc
Absorbed current: at 12V – 700 mA peak/ 500 mA holding, at 24V – 300 mA peak/200 mA holding
Electronic opening holder
Bi-coulor LED, red/green, to monitor electric handle status - handle abled or disabled
Blue LED to light the bottom of the door

Application: replacement of traditional mechanical handle mounted in the pull side of the door. The handle, normally free turning, can be enabled by de-energizing ( 40620 version) or energizing ( 40820 version) through a button contact or access control system.