Enabling the buzzer - version 40801 and 40601 only

• Connect the programming button (not included) to the blue wire and to the green signal earth wire (gnd).
• With the electric handle not under power, press the programming button.
• Power up the electric handle while keeping the button pressed.
• The LED will flash orange twice and emit 2 beeps, then it will turn red. When the programming button is released again the LED will flash twice and emit 2 beeps to confirm activation of the buzzer.

Disabling the buzzer - version 40801 and 40601 only

• Connect the programming button (not included) to the blue wire and to the green signal earth wire (gnd).
• With the electric handle not under power, press the programming button.
• Power up the electric handle while keeping the button pressed.
• The LED will flash orange twice and emit 2 beeps, then it will turn red. When the programming button is released again the LED will flash twice without emitting any beep, to confirm disabling of the buzzer.