Electronics for interlocking system

		Back

Home > Electronic control unit for interlocking

Electronic control unit for interlocking system

Electronic card for managing one door (or more interlocking doors) for use with electric strikes series 346/348, safety electromagnets series 13100, 13700, solenoid bolts series 206, 208, 216, 218, 219

Code 54610

Opera Srl - Art. 54610

Art. 54610

Electronic unit for single door. It is used to temporize the opening or closing of an electric lock

54610 - Electronic unit for single door

This unit is used to temporize the opening or closing of the electric locks and strikes.

Plastic box dimensions : 240x150x48 mm.

Operating voltage : 12/24 Vac/dc

Power consumption: 60 mA in stand by.

Microprocessor electronic.

Arranged for interlock connection between 2 or more doors.

- Input for opening contact

- Input for block

- Input for Emergency and Alarm reset

- Input for bolt position

- Input for door's leaf position

- Output with relay C./N.O./N.C. for connection with indicator lamps

- Output with relay C./N.O./N.C. for alarm prolonged door opening, breakdown, emergency, simultaneous opening of 2 or more doors if connected in interlock configuration.

Push buttons for monitoring and adjustment of reclosing times from 0-5 sec. to approach of door and from 0-60 sec. if the door is not opened.

Power supply and batteries

This sophisticated door interlock controller allows 2, 3 or 4 doors to be interlocked to restrict or control entry to and from areas that need to be secured against two or more doors being open simultaneously

Back

Code 54710

Opera Srl - Art. 54710

Art. 54710

Electronic unit for 2 doors. It is used to connect two doors in interlocking

54710 - Electronic unit for 2 doors

This unit is used to make an interlocking system between 2 doors. The doors must be equipped with electric locks.