Related products :

• Prima solenoid lock
  
  
• Electric lock for automatic gates

قفل كهربائي للهيكل من الألومنيوم

Solenoid bolt for single door

Mechanical opening with European type cylinder ( cylinder with internal
knob not usable )

Striking plate in stainless steel (mm) 160 x 25 x 3
Armature plate in stainless steel (mm) 150 x 25 x 3
Revolving bolt in anti-cutting hardened steel with mechanical block in
closed position
Deadbolt dimensions (mm): extension 20 (25 in the XL version),
diameter 16
Lock body dimensions on page 92
Operating voltage : 12/24 Vdc
Absorbed current : 2.5/3 A peak - 130/230 mA for maintenance with
electronic control
Internal microprocessor control electronics
Rapid plug-in connector
Ready for interlocking connection of 2 or more doors
N.O. Opening control
Deadbolt position contact C. / N.O. / N.C
Opto-electronic bolt position control
Magnetic door position sensor

Push buttons for monitoring and adjustment of relocking times from 0-5
seconds upon approach of the door and from 0-60 seconds if the door
is not opened.

The timings can be disabled for use of the solenoid bolt with external
control electronics

• Contacts
• Faq
• Buy online

Catalogue - Pdf 654 Kb

Solenoid bolt for interlocking systems

Mechanical opening with European type cylinder ( cylinder with internal
knob not usable )

Striking plate in stainless steel (mm) 160 x 25 x 3
Armature plate in stainless steel (mm) 150 x 25 x 3

Revolving bolt in anti-cutting hardened steel with mechanical block in
closed position
Deadbolt dimension (mm): extension 20 (25 in the XL version),
diameter 16
Lock body dimensions on page 92
Operating voltage : 12/24 Vdc
Absorbed current : 2.5/3 A peak - 130/230 mA for maintenance with
electronic control
Internal microprocessor control electronics
Rapid plug-in connector
Ready for interlocking connection of 2 or more doors
N.O. Opening, Block, Emergency and Alarm Reset Controls
Deadbolt position contact C. / N.O. / N.C
Door position contact N.O. for the Open / Closed monitoring function
or for use of an external door alignment sensor
Open Collector Alarm contact for Prolonged Opening of the door,
Fault, Emergency, simultaneous Opening of 2 or more doors if in
interlocked configuration

Opto-electronic bolt position control
Magnetic door position sensor

Push buttons for monitoring and adjustment of relocking times from 0-5
seconds upon approach of the door and from 0-60 seconds if the door is
not opened

The timings can be disabled for use of the solenoid bolt with external
control electronics
Push button for monitoring and adjustment of the Prolonged Door
Open Alarm trigger

Carter for horizontal solenoid lock for surface fixing

Solenoid bolt for single door

Mechanical opening with European type cylinder

Striking plate in stainless steel (mm) 160 x 25 x 3
Armature plate in stainless steel (mm) 150 x 25 x 3

Latch in anti-cutting hardened steel not reversible ( indicate the
opening hand )
Latch dimensions (mm): 16 (diameter) x 14 x 16 extension

Lock body dimensions (see below):
Operating voltage : 12/24 Vdc
Absorbed current : 2.5/3 A peak - 130/230 mA for maintenance with
electronic control

Internal microprocessor control electronics
Rapid plug-in connector
N.O. Opening control
Monitored latch position contact C. / N.O. / N.C.
Opto-electronic Monitored latch position control

Push buttons for monitoring and adjustment of relocking times from 0-
60 seconds if the door is not opened.

The timings can be disabled for use of the solenoid bolt with external
control electronics